beautypg.com

21 filter rule entry commands, 1 get filter rule entry, 2 create filter rule entry – Planet Technology IP DSLAM IDL-4801 User Manual

Page 383: 3 delete filter rule entry, 4 modify filter rule entry

background image

IP DSLAM

383

5.13.21 Filter rule entry Commands

5.13.21.1 Get Filter rule entry

Description:

Use this command to get.

Command Syntax:

get filter rule entry [ruleid ]

5.13.21.2 Create filter rule entry

Description:

Use this command to create.

Command Syntax:

create filter rule entry ruleid r [ action drop | allow | setprio |

sendtocontrol | retagprio | copytocontrol | clfrdef | gotonextrule | forwardexit|

exprdef | modifytos | setbaclevel | pktvlanid | retagvlanid | pktservicevlanid |

retagservicevlanid | retagserviceprio | ratelimiter | Mirror ] [ description

] [ priority ] [ status enable | disable ]

[ statsstatus enable | disable ] [ ruleprio low | high ] [ ruledir in | out ]

[ applywhenreq enable | disable ] [ pkttype Mcast | Bcast | Ucast ] [ snooplevel

interface | bridge ] [ exprid ] [ actionval ]

[ actionmask ]

5.13.21.3 Delete filter rule entry

Description:

Use this command to delete.

Command Syntax:

delete filter rule entry ruleid

5.13.21.4 Modify filter rule entry

Description:

Use this command to modify.

This manual is related to the following products: