Planet Technology IP DSLAM IDL-4801 - Manual (Page 217)

IP DSLAM 217
5.7.4.4 Modify bridge static mcast
Description:
Use this command is used to modify
Command Syntax:
modify bridge static mcast [vlanid ] mcastaddr
[egressports ] [forbidegressports ]
Parameters:
Name Description
Vlanid The VLAN ID for this VLAN. In devices supporting "Shared Vlan
for multicast" capability, the information for a multicast MAC
address is shared across VLANs. Hence vlan id is an optional
parameter. In devices supporting "Independent Vlan for
multicast" capability, each vlan can have its own information for
a multicast MAC address. Hence vlanid is a mandatory
parameter in all the commands other than - get. For No Vlan
case, vlan id is not required. This feature is not supported for
VLAN with vlanid as 4097.
Type: Optional for all commands
Valid values: 0 - 4095
Default value:
mcastaddr The destination multicast MAC address in a frame, to which this
entry's filtering information applies. Bit 0 of the first octet of the
MAC address indicates a group (multicast) MAC address, if the
bit is SET. For example, 01:00:00:00:00:00,03:FF:FF:FF:FF.
Addresses in the range 01:80:C2:00:00:00 -01:80:C2:00:00:0f
and 01:80:C2:00:00:20 -01:80:C2:00:00:2f have been blocked
as value of this index, as these are reserved GARP addresses.
Type : Create － Mandatory
Modify － Mandatory
Delete － Mandatory
Get － Optional
Default value:
egressports
|none
The set of ports, to which frames received from a specific port
and destined for a specific Multicast MAC address must be
forwarded. A port may not be added in this set, if it is already a
member of the set of ports in ForbidEgressPorts. More than
one value can be given, separated by spaces.
Type :Optional for all commands