Planet Technology IP DSLAM IDL-4801 - Manual (Page 318)

IDL series User Guide 318
5.11.2 Ethernet Commands
5.11.2.1 Create ethernet intf
Description:
Use this command to create a physical Ethernet interface.
Command Syntax:
create ethernet intf ifname [ip ] [mask
][usedhcp true|false] [speed {auto|100BT|1000BT}] [type
uplink|downlink][enable | disable] [pkttype Mcast|Bcast|UnknownUcast|All|None]
[orl decvalue][duplex half| full|auto] [profilename ]
[mgmtvlanid ] [priority ] [trfclassprofileid
] [Ctlpktinstid ] [ ctlpktgroupid
| none ] [mgmtsvlanid ] [m2vmacdbid
|none] [ mgmttvlanid ]
5.11.2.2 Delete ethernet intf
Description:
Use this command to delete a physical Ethernet interface.
Command Syntax:
delete ethernet intf ifname
5.11.2.3 Get ethernet intf
Description:
Use this command to get information about a particular physical Ethernet interface,
or about all the interfaces.
Command Syntax:
get ethernet intf [ifname ]
5.11.2.4 Modify ethernet intf
Description:
Use this command to modify physical Ethernet interface configuration.
Command Syntax:
modify ethernet intf ifname [ip ] [mask
][usedhcp true|false] [speed {auto|100BT|1000BT}] [type
uplink|downlink][enable | disable] [pkttype Mcast|Bcast|UnknownUcast|All|None]
[orl decvalue][duplex half| full|auto] [profilename ]