Planet Technology IP DSLAM IDL-4801 - Manual (Page 115)

IP DSLAM 115
5.2.2 Bridge port prioinfo Commands
5.2.2.1 Get bridge port prioinfo
Description:
Use this command to get.
Command Syntax:
get bridge port prioinfo [portid ]
5.2.2.2 Modify bridge port prioinfo
Description:
Use this command to modify.
Command Syntax:
modify bridge port prioinfo portid portid [defprio ] [numtrfclass
] [defsvprio ]
Parameters:
Name Description
portid <portid> Port number of the port for which this entry contains bridge
management information.
Type: Modify -- Mandatory
Get -- Optional
Valid values: 1 - 386
defprio The default ingress User Priority which can be configured by
the user.
Type: Modify － Optional
Valid values: 0 - 7
numtrfclass The number of egress traffic classes supported on this port.
Type: Modify － Optional
Valid values: 1 - 8
defsvprio Not supported
Type: Modify Optional
Valid values: 0 - 7
Example:
$ get bridge port prioinfo portid 1