Planet Technology IP DSLAM IDL-4801 - Manual (Page 391)

IP DSLAM 391
stageid <stageid-val> This field specifies the stage on the interface to which the rule in
the mapping belongs
Type: Create － Mandatory
Delete － Mandatory
Modify － Mandatory
Get － Optional
Valid values: 1
ruleid <ruleid-val> Rule Id of the rule in the mapping
Type: Create － Mandatory
Delete － Mandatory
Modify － Mandatory
Get － Optional
Valid values: 1 - 65535
orderid <ordered-val> This field indicates the order of the rule in the attached sequence.
The default value for this field will be same as the ruleid of the entry.
Type: Create － Optional
Modify － Optional
Valid values: 1 - 65535
Default value: Same As Ruleid
Example:
$ create filter rule map ifname eoa-0 stageid 1 ruleid 1 orderId 1
Output:
Verbose Mode On
Entry Created
Interface : eoa-0 Stage Id : 1
Rule Id : 1 Order Id : 1
Verbose Mode Off:
Entry Created
Output field:
Field Description
Interface Name of the interface whose mapping is being created. Only EOA,
PPPoE, IPOE and ethernet interfaces are allowed. If the value of
this field is 'All', it indicates all interfaces, 'AllEoa' indicates all 'eoa'
interfaces, and 'AllEth' indicates all 'ethernet'interfaces. AllPppoe'
indicates all 'PPPoE'interfaces, 'AllIpoe' indicates all 'IPOE'