Planet Technology IP DSLAM IDL-4801 - Manual (Page 87)

IP DSLAM 87
4.1.5 Set System Time
IDL series support SNTP (Simple Network Time Protocol), used to synchronize its clocks in
the Internet. IP DSLAM will get the system time via SNTP server while a SNTP sever is
created.
4.1.5.1 Configuration
Follow the steps below to set the SNTP server.
Note:
System time will lost while the system is powered off.
Step 1:
Set the IP DSLAM as the SNTP client
$create sntp?
Command Description
------- -----------
servaddr SNTP Server address
$create sntp servaddr 192.168.100.253
Entry Created
Server Addr : 192.168.100.253 Status : active
Step 2:
Enable SNTP client
$modify sntp cfg enable
Status : Disable
Set Done
Status : Enable
$