Planet Technology IP DSLAM IDL-4801 - Manual (Page 572)

IDL series User Guide 572
5.22.3.3 Reset rmon mpool
Description:
Use this command to reset some parameters of memory pool. This command will
reset the following parameters of memory pool.
z
Set MemAllocFailCount value to zero.
z Set MemFreeFailCount value to zero.
z Set watermark value to the value of the currently allocated memory from that
pool.
z
Set ThresholdCount value to the zero.
Command Syntax:
reset rmon mpool
Parameters:
None
Example:
$ reset rmon mpool
Output Field:
None
5.22.4 RMON Queue Info Commands
5.22.4.1 Get rmon queue
Description:
Use this command to get the information about a particular queue or about all the
queues present in the system.
Command Syntax:
get rmon queue [rname ]
Parameters:
Name Description
rname <queue-name> This parameter specifies the name of a particular
queue.
Valid values: Any queue name present in the
system.