Planet Technology IP DSLAM IDL-4801 - Manual (Page 596)

IDL series User Guide 596
Parameters:
Name Description
control
This specifies whether the control plane binaries are to be
fetched from the network or the binaries already present in
NVRAM are to be used.
Type : Optional
Default value: Binary present in NVRAM.
dataplane
<nvram|network>
This specifies whether the data plane binaries are to be
fetched from the network or the binaries already present in
NVRAM are to be used.
Type: Optional
Default value: Binaries present in NVRAM.
config
last|backup|clean|minimu
m>
This specifies the boot configuration – the
source, from which to boot up.
The boot configuration is set to last automatically, whenever
a commit command is given. The boot configuration being an
optional parameter, if it is not specified, it retains the previous
value. So giving reboot after a commit will result in a reboot
from the committed configuration.
Default: Use Default factory configuration while booting up.
Backup: Use the Backup configuration to boot the system.
Last: Use last committed configuration to boot the system.
Minimum: Use a configuration in which:
• the size command is executed.
• the user (login name and password as root) is created.
• an Ethernet interface with IP address 192.168.1.1 mask
255.255.0.0 is created.
Clean: The system comes up with nothing configured.
Network: The system fetches the default configuration file
from the remote host and system comes up with this default
configuration, fd.cfg.
Type : Optional
Default value: If a reboot is being given for the first time,
then the default value is default. Otherwise, the default value
is the same as what was given the last time.