Planet Technology IP DSLAM IDL-4801 - Manual (Page 33)

IP DSLAM 33
2.2 Hardware Installation
The PLANET IDL series can be installed in a standard 19-inch rack by using the mounting
brackets provided. Mount the shelf on the rack using the large screws provided. The
procedure to connect and wire the system is as follows.
2.2.1 System Requirements
z Workstation with Windows NT/2000/XP
z RJ-45 cables
z RJ-11 cables
z Telco-50 cables
z RS-232 cables
z MDF Patch Panel (Model No.: IDL-PAN-48).
2.2.2 Rear Panel Connection
The following figure shows the rear panel connection of IDL series:
Step 1: Ground the IP DSLAM by connecting a grounded wire (Optional).
Step 2: Connect the ADSL line connector, a 50-pin centronic connector, of IP DSLAM to
CPE by using telco cable. Each line connector supports 24 ports of
ADSL/ADSL2/ADSL2+ for Data path from MDF (Main Distribution Frame).