Planet Technology IP DSLAM IDL-4801 - Manual (Page 528)

IDL series User Guide 528
Modify -- Optional
Default value: None
acival <acival-val> This is use to configure Agent Circuit Id for this instance. If
ACI bit is set in gsvPiaConfigSubOptionBitmask then this
parameter will overwrite the generated Agent Circuit Id
Type: Create -- Optional
Modify -- Optional
Default value: "\0"
raival <raival-val> This is used to configure Remote Agent Id for this instance.
This parameter uniquely identifies the subscriber on the
associated access loop logical port on Columbia.
Type: Create -- Optional
Modify -- Optional
Default value: "\0"
syncratefields
ActualDataRateupstrm
|
ActualDataRatednstrm
| MinDataRateupstrm |
MinDataRatednstrm |
AttainableDataRateups
trm |
AttainableDataRatedns
trm |
MaxDataRateupstrm |
MaxDataRatednstrm |
MinLpDataRateupstrm
|
MinLpDataRatednstrm
| MaxDelayupstrm |
ActualDelayupstrm |
MaxDelaydnstrm |
ActualDelaydnstrm |
None | None
This bitmask is used to indicate what all access loop
characteristic parameters are to be added to access loop
characteristic suboption.
Type: Create -- Optional
Modify -- Optional
iwftagfromclientact
drop | forward
This field specifies the Action to be taken on receiving
PPPoE discovery msg with IWF suboption from client. It
can be configured as either drop or forward. Default action
is to drop the packet silently.
Type: Create -- Optional
Modify -- Optional
Default value: drop