Planet Technology IAD-200 - Manual

ADSL 2/2+ VoIP Router
Key Feature
IAD-200/
IAD-200W
Data Sheet
1
T he PLANET ADSL 2/2+ VoIP Router - IAD-200, and 802.11g Wireless
ADSL 2/2+ VoIP Router - IAD-200W, provide ISP or residential Home Users
the ideal solution for sharing a high-speed ADSL 2/2+ broadband Internet
connection on a 54Mbps wireless network (IAD-200W) and a 10/100Mbps
Fast Ethernet backbone and also with the capability to make the calls
through Internet. They can support downstream transmission rate up to
24Mbps and upstream transmission with rate up to 3.5Mbps while
upstream transmission. These products support PPPoA (RFC 2364 - PPP
over ATM Adaptation Layer 5), RFC 1483 encapsulation over ATM (bridged
or routed), PPP over Ethernet (RFC 2516), and IPoA (RFC1577) to establish
a connection with ISP.
Via the user-friendly management interface, IAD-200/200W can be
managed by workstations running standard web browsers. Furthermore,
both of them provide DHCP server support, virtual server, DMZ support,
VPN PPTP/IPSec pass through, and URL filtering capability.
The IAD-200/200W also serves as an Internet firewall to protect your
network from being accessed by outside users. Not only provides the
natural firewall function (Network Address Translation, NAT), but provides
rich firewall features to secure a user’s network. All incoming data packets
are monitored and filtered. Besides, the FXS interface and SIP (RFC3261)
protocol offer the capability to make the call in a cost-effective way, either
through Internet or local phone system.
Advanced Internet Functions
• Application Level Gateways (ALGs). Applications which use non-standard
connections or port numbers are normally blocked by the Firewall. The ability
to define and allow such applications is provided, to enable such applications
to be used normally.
• Special Applications. This feature, also called Port Triggering, allows you to use
Internet applications which normally do not function when used behind a
firewall.
• Virtual Servers. This feature allows Internet users to access Internet servers on
your LAN. The required setup is quick and easy.
• URL Filter. Use the URL Filter to block access to undesirable Web sites by LAN
users.
• Logs. Define what data is recorded in the Logs, and optionally send log data to
a Syslog Server. Log data can also be E-mailed to you.
• Access Control. Allows administrators to restrict the Internet Access available
to PCs on your LAN.
• Firewall. As well as the built-in firewall to protect your LAN, you can define
Firewall Rules to determine which incoming and outgoing traffic should be
permitted.
• Universal Plug and Play (UPnP) UPnP allows automatic discovery and
configuration of the Broadband Router. UPnP is supported by Windows ME, XP,
or later.
• Dynamic DNS Support. DDNS, when used with the Virtual Servers feature,
allows users to connect to Servers on your LAN using a Domain Name, even if
you have a dynamic IP address which changes every time you connect.
• VPN Pass through Support. PCs with VPN (Virtual Private Networking) software
using PPTP, L2TP, and IPSec are transparently supported - no configuration is
required.
• Network Address Translation (NAT) / Network Address Port Translation (NAPT).
Allows multi-users to access outside resources such as the Internet
simultaneously with one IP address/one Internet access account.
• RIP1/2 Routing. It supports RIP1/2 routing protocol for routing capability.
• Web-based Management. It supports web based GUI for configuration and
management.
• Firmware Upgradeable. Device can be upgraded to the latest firmware through
the WEB based GUI.
• FAX support It supports T.38 and G.711 fax standards.
• QoS It builds Quality of Service in the device for excellent voice quality.
Wireless Features (model IAD-200W only)
• Standards Compliant. The IAD-200W complies with the IEEE802.11g (DSSS)
specifications for Wireless LANs. Maximum of 54Mbps are supported.
• Supports both 802.11b and 802.11g Wireless Stations. The 802.11g standard
provides for backward compatibility with the 802.11b standard, so both
802.11b and 802.11g Wireless stations can be used simultaneously.
• WEP support. Support for WEP (Wired Equivalent Privacy) is included. Key sizes
of 64 Bit and 128 Bit are supported.
• WPA-PSK support. Key sizes of 256 Bit TKIP encryption are supported.
• Wireless MAC Access Control. The Wireless Access Control feature can check
the MAC address (hardware address) of Wireless stations to ensure that only
trusted Wireless Stations can access your LAN.
LAN Features
• DHCP Server Support. Dynamic Host Configuration Protocol provides a
dynamic IP address to PCs and other devices upon request. The IAD-200/200W
can act as a DHCP Server for devices on your local LAN and WLAN.
VoIP Features
• SIP 2.0 Support. IAD-200/200W is with SIP2.0 support for the compatibility of
most popular VoIP telephone server provider and SIP proxy gateway.
• Most SIP Proxy Server support. IAD-200/200W compatible with known
popular Internet SIP Proxy provider like FWD and Infonex.
FXS and PSTN interface
• IAD-200/200W supports one FXS interface that can direct wire to any analog
telephone for direct Internet Call through the Internet Telephony Service
Provider. The PSTN interface also makes the local phone call directly, or call
Internet Access Features
• Shared Internet Access. All users on the LAN or Wireless LAN can access the
Internet through the IAD-200/200W using only a single external IP Address.
The local (invalid) IP Addresses are hidden from external sources. This process
is called NAT (Network Address Translation).
• Built-in ADSL 2/2+ Modem. The IAD-200/200W provides ADSL 2/2+ modem,
and supports all common ADSL connections.
• IPoA, PPPoE, PPPoA, Direct Connection Support. Various WAN connections
are supported by IAD-200/200W.
• Auto-detection of Internet Connection Method. In most situations, the IAD-
200/200W can test your ADSL and Internet connection to determine the
connection method used by your ISP.
• Fixed or Dynamic IP Address. On the Internet (WAN port) connection, the
IAD-200/200W supports both Dynamic IP Address (IP Address is allocated on
connection) and Fixed IP Address.