8 nbize commands, 1 get nbsize, 2 modify nbsize – Planet Technology IP DSLAM IDL-4801 User Manual
Page 617: Parameters

IP DSLAM
617
Parameters:
Name
Description:
numentries
This specifies the last
reboot failures recorded in the system.
Type: Optional
Valid values : 1 to 100
Default : 1
Example:
$ get system reboot info numentries 1
Output :
Verbose Mode On
CP Bin Version : 1.6
DP Bin Version : 1.8
Time of Reboot : Thu Jan 2 12:34:56 1970
Reboot Failure Cause : DP Init Failure
Reboot Type : Secondary CFG
Output Fields:
FIELD
Description
Control Plane Version
The control Plane Version with which the system
could not come up.
Data Plane Version
The data Plane Version with which the system
could not come up.
Time of Reboot
Time at which the reboot failure occured.
Type of Reboot
This tells the type of reboot with which the
system is trying to come up. The various possible
values are :-
Last, Back Up, Default, Minimum, Clean.
Failure Cause
This tells the various causes of failure that
system encountered while rebooting. It can be :-
Sdram CP Decompress failed
Nvram CP Decompress failed
Sdram DP Decompress failed
Nvram DP Decompress failed
DP Init Failure
Nvm CP Nvm DP CI Mismatch
Nvm CP Sdram DP CI Mismatch
Sdram CP Nvm DP CI Mismatch #