Appendix a --- fd.cfg in detail – Planet Technology IP DSLAM IDL-4801 User Manual

Page 693

IP DSLAM

693

Appendix A --- FD.cfg in detail

verbose off

create user name admin passwd admin root

create dsl system

create ethernet intf ifname eth-1 ip 192.168.100.111 mask 255.255.255.0

create bridge port intf portid 385 ifname eth-1 status enable

create ethernet intf ifname eth-3 ip 192.168.1.1 mask 255.255.255.0

modify bridge mode enable

create atm port ifname atm-1 lowif dsl-1

create atm vc intf ifname aal5-1 lowif atm-1 vpi 8 vci 81

create eoa intf ifname eoa-1 lowif aal5-1

create bridge port intf ifname eoa-1 portid 1 learning enable status enable

create atm port ifname atm-2 lowif dsl-2

create atm vc intf ifname aal5-2 lowif atm-2 vpi 8 vci 81

create eoa intf ifname eoa-2 lowif aal5-2

create bridge port intf ifname eoa-2 portid 2 learning enable status enable

create atm port ifname atm-3 lowif dsl-3

create atm vc intf ifname aal5-3 lowif atm-3 vpi 8 vci 81

create eoa intf ifname eoa-3 lowif aal5-3

create bridge port intf ifname eoa-3 portid 3 learning enable status enable

create atm port ifname atm-4 lowif dsl-4

create atm vc intf ifname aal5-4 lowif atm-4 vpi 8 vci 81

create eoa intf ifname eoa-4 lowif aal5-4

create bridge port intf ifname eoa-4 portid 4 learning enable status enable

create atm port ifname atm-5 lowif dsl-5

create atm vc intf ifname aal5-5 lowif atm-5 vpi 8 vci 81

create eoa intf ifname eoa-5 lowif aal5-5

create bridge port intf ifname eoa-5 portid 5 learning enable status enable

This manual is related to the following products: