31 filter subrule igmp commands, 1 get filter subrule igmp, 2 create filter subrule igmp – Planet Technology IP DSLAM IDL-4801 User Manual
Page 425

IP DSLAM
425
Output field:
Field
Description
Rule Id
Unique identifier of a filter rule of which this sub rule is being
created
Subrule Id
Unique identifier of a filter subrule
Icmp type
ICMP type
Icmp code
ICMP code
ICMP type comparison ICMP type comparison type
ICMP code comparison ICMP code comparison type
Subrule Priority
This specifies the priority of the subrule. Based on
this priority value, the subrule is created in fast or
slow memory. In case priority is specified as 'asinrule', subrule
priority will be same as specified in the
rule.
Transport Header
This specifies the type of the transport header in the packet in
which the corresponding IP is being transported. If the value of
this field is ethernet, then the IP is being carried in the ethernet
header. If it is ‘pppoe’, then the corresponding IP is being carried
in the PPP header.
References:
z
Generic Filter commands
5.13.31 Filter subrule IGMP Commands
5.13.31.1 Get Filter subrule igmp
Description:
Use this command to get.
Command Syntax:
get filter subrule igmp [ruleid
5.13.31.2 Create filter subrule igmp
Description:
Use this command to create.