Planet Technology IP DSLAM IDL-4801 - Manual (Page 195)

IP DSLAM 195
5.6.10 Bridge tbg traps Commands
5.6.10.1 Get bridge tbg traps
Description:
Use this command to get.
Command Syntax:
get bridge tbg traps
5.6.10.2 Modify bridge tbg traps
Description:
Use this command to modify.
Command Syntax:
modify bridge tbg traps [bindingstatus enable | disable] [fdbtrapstatus enable |
disable] [vmactrapstatus enable | disable] [traploss Ok | Notok]
Parameters:
Name Description
bindingstatus enable
|disable
This parameter allows the user to enable or disable the generation of 'binding
status changed' trap. This trap is sent when the port binding of a unicast entry
changes, i.e. the same address is learnt on a different port in the same
Forwarding Database.
Type: Modify － Optional
fdbtrapstatus enable
|disable
This parameter allows the user to enable or disable the generation of
forwarding table trap. This trap is sent when an entry in the forwarding table is
learnt/ created/modified/deleted or aged out. These traps shall be given by
the packet filter module to the applications registered for these traps.
Type: Modify － Optional
vmactrapstatus
enable |disable
This parameter allows the user to enable or disable the generation of trap
when MAC to Virtual MAC mapping for the MAC address is not found in the
M2VMac database associated with the corresponding interface. These traps
shall be given by the packet filter module to the applications registered for
these traps.
Type: Modify － Optional
traploss Ok | Notok This parameter tells whether the loss of binding status and forwarding table
trap is acceptable or not. Such a trap can be lost because of the unavailability
of resources. ‘OK’ means trap loss is acceptable. In this case, when the trap
is lost an indication shall be given to the application, which can then