9 bridge static ucast commands, 1 get bridge static ucast, 2 create bridge static ucast – Planet Technology IP DSLAM IDL-4801 User Manual
Page 192: 3 delete bridge static ucast

IDL series User Guide
192
Cautions:
z
An entry in this table shall not be applicable for a bridge port created over
PPPOE/IPOE interface.
References:
z Bridge
Commands
5.6.9 Bridge static ucast Commands
5.6.9.1 Get bridge static ucast
Description:
Use this command to get.
Command Syntax:
get bridge static ucast [vlanid
5.6.9.2 Create bridge static ucast
Description:
Use this command to create.
Command Syntax:
create bridge static ucast vlanid
[portid
5.6.9.3 Delete bridge static ucast
Description:
Use this command to delete.
Command Syntax:
delete bridge static ucast vlanid
This manual is related to the following products: