Planet Technology IP DSLAM IDL-4801 - Manual (Page 691)

IP DSLAM 691
Caution:
None. The modified prompt is not saved across a reboot.
5.28.2.5 Traceroute
Description:
This command is used to trace the route to the specified destination.
Command Syntax:
traceroute {ip | dname } {ping | udp} [-m
] [-w ] [-p ] [-q ]
Parameters:
Name Description
ip-address | dname
This specifies the Destination address to be pinged.
Type: Mandatory
Valid values : Any Valid IP Address (0.0.0.0 – 255.255.255.255) or
Domain Name (String of Max 63 characters (‘a’-‘z’, ’A’-
‘Z’, ’0’-‘9’, ’-‘, ’_’and ‘.‘)
Ping | udp
Traceroute probe message type
Type: Mandatory
-m
Maximum number of hops to search for ip-address Type: Optional
Valid Values: 0-255
Default Value : 30
-w
This specifies the timeout in seconds
Type: Optional
Valid values : 0-65535
Default Value : 5
-p
Destination UDP port to be used, only when Probe is Udp
Type: Optional.
Valid Values: 0-65535
Default Value : 32768
-q
Number of probes to be sent for each TTL value Type: Optional
Valid Values: 0-255
Default Value : 3
Example:
$ traceroute 192.168.1.13 ping