Planet Technology IP DSLAM IDL-4801 - Manual (Page 469)

IP DSLAM 469
5.16 IP Commands
5.16.1 IP Net to Media Table Commands
5.16.1.1 Get arp
Description:
Use this command to display either the full ARP table or a single entry.
Command Syntax:
get arp [rid ] [ip ]
5.16.1.2 Create arp
Description:
Use this command to create a static entry in the ARP Table.
Command Syntax:
create arp [rid ] ip macaddr
5.16.1.3 Delete arp
Description:
Use this command to delete an entry from the ARP table.
Command Syntax:
delete arp [rid ] ip
Parameters:
Name Description
rid <rid-val> RID refers to the Routing Information Database. This
database contains information about the routes in the
system. Each RID identifies a flow and defines route
related information for that flow. The RID defines a flow
based on the VLAN Id. The database can be of 2 types,
IRD (Independent Routing Database) where there are
more than one RIDs in the system and each RID defines
separate routes in context of itself. . If VlanId and
RID have been created and the routing database is
configured for IRD, than routes in RID shall define
flow for packets coming on VLAN Id . The other
mode for the database is SRD (Shared Routing