Planet Technology IP DSLAM IDL-4801 - Manual (Page 692)

IDL series User Guide 692
Output:
Tracing route to [192.168.1.13]
Over a maximum of 30 hops
1 0.000000 ms 0.000000 ms 0.000000 ms 192.168.1.13
Trace complete.
Output Fields:
FIELD Description
1 This denotes the hop counter value.
2-4
These are the Round trip timings of the 3 probe packets sent. A * denotes that
this probe was missed.
5 This is the ip address of the intermediate/destination node.
References:
ping command.
5.28.2.6 Verbose
Description:
Using this command, a user can view the status of entries before and after the
execution of a command (create, delete, modify,get). However if this mode is
turned off, then display only shows the final result of execution of command, i.e.
whether it was successful or failure.
Command Syntax:
Verbose [on | off]
Parameters:
Name Description
On
Used for switching on the verbose mode.
Type: Optional
Valid values: On.
Off
Used for switching off the verbose mode.
Type: Optional.
Valid values: Off
Mode:
Super-User