Planet Technology IP DSLAM IDL-4801 - Manual (Page 503)

IP DSLAM 503
Type: Create － Optional
Modify － Optional
Default value: 0x0
sessionid
<sessionid-val>
Session Id for the session given only in case a static session is being
created.
Type: Create － Optional
Modify － Optional
Valid values: 1 - 0xffff
Default value: 0x0
acmacaddr
<acmacaddr-val>
MAC address of the remote AC given only in case a static session is
being created.
Type: Create － Optional
Modify － Optional
Default value: 00:00:00:00:00:00
macaddrprof
<macaddrprof-val>
Profile Id for self MAC addresses. The profile for the same is created
using the PPPoEMacAddrProfileTable.
Type: Create － Mandatory
Modify － Optional
servicenameprof
| any |anyconfigured
Profile Id related to Service Name for the Session based on which the
AC is selected.The Profile for the same is created using the
PPPoESessionProfileTable. A value of "any" means no specific
service is needed to select an AC. A value of "anyconfigured"means
any configured service name profile can be used for selecting an AC.
Type: Create － Optional
Modify － Optional
Valid values: , 0-0xffffffff
Default value: 0
acnameprof
|any
| anyconfigured
Profile Id related to AC Name for the Session based on which the AC
is selected. The Profile for the same is created using the
PPPoEAcProfileTable. A value of "any" means no specific AC is
needed for establishing a session on the WAN side. A value of
"anyconfigured"means any configured AC name profile can be used
for selecting an AC.
Type: Create － Optional
Modify － Optional
Valid values: 0-0xffffffff
Default value: 0
ethpkttype Type2 |
802_3
This specifies the type of the packet.
Type: Create － Optional
Modify － Optional