1 contents of fd.cfg – Planet Technology IP DSLAM IDL-4801 User Manual
Page 73

IP DSLAM
73
4.1.2.1 Contents of FD.cfg
Use WordPad or Word to open FD.cfg. (See the following figure)
The default configuration in FD.cfg summarized as follows.
z Default
IP:
192.168.100.111
z SNTP:
disable
z RFC-1483 Bridge mode only
z One PVC (8/81) for each ADSL port
z Bridge port numbering 1 to 48 mapping to PVC 8/81 for ADSL port1 to port 48/24
z VLAN feature Disable
z Eth0 enable (for uplink), its bridge port number is 385
z Eth1 disable (for downlink)
z MGMT interface disable
Note:
To view the detailed contents, please refer to the Appendix A.
This manual is related to the following products: