Planet Technology IP DSLAM IDL-4801 - Manual (Page 516)

IDL series User Guide 516
syncratefields
ActualDataRateupstrm |
ActualDataRatednstrm |
MinDataRateupstrm |
MinDataRatednstrm |
AttainableDataRateupstrm |
AttainableDataRatednstrm |
MaxDataRateupstrm |
MaxDataRatednstrm |
MinLpDataRateupstrm |
MinLpDataRatednstrm |
MaxDelayupstrm |
ActualDelayupstrm |
MaxDelaydnstrm |
ActualDelaydnstrm | None |
None
This bitmask is used to indicate what all access loop
characteristic parameters are to be added to access loop
characteristic suboption.
Type: Create -- Optional
Modify -- Optional
op82fromclientact drop |
forward
This specifies the action to be taken on receiving DHCP
message from the client with option 82. If DHCP message
contains option82 and we want the packet to be dropped then
drop should be set and if we want the packet to be forwarded
then forward should be set.
Type: Create -- Optional
Modify -- Optional
Default value: drop
learning disable | enable This field specifies whether DHCP learning is to be done on this
port or not. If enabled DRA will learn the IP Addresses assigned
towards this port using upstream/downstream packets received
on this port.
Type: Create -- Optional
Modify -- Optional
Default value: enable
portno <portno-val> This field specifies Atm Port number.Its value is considered
only when the bitmask for portid is set in
ConfigSubOptionBitmask
Type: Create -- Optional
Modify -- Optional
Default value: \0