6 bridge port starts table commands, 1 get bridge port stats, 2 reset bridge port stats – Planet Technology IP DSLAM IDL-4801 User Manual
Page 181

IP DSLAM
181
5.6.6 Bridge Port Starts Table Commands
5.6.6.1 Get bridge port stats
Description:
Use this command to get the statistics of a single port, or all the ports.
Command Syntax:
get bridge port stats [portid
5.6.6.2 Reset bridge port stats
Description:
Use this command to reset bridge port statistics.
Command Syntax:
reset bridge port stats portid
Parameters:
Name
Description
portid
<portid-val>
This is the bridge port identifier. If this is not specified in
the get command, then information for all ports is
displayed.
Type : Get - Optional
Reset - Mandatory
Valid values : 1- 578
Example:
$ get bridge port stats portid 1
Output:
Verbose Mode On
PortId : 1 Max Info Size : 1500
Out Frames : 138 In Frames : 129
In Discards : 3
HC In Frames : 300
HC Out Frames : 350
HC In Discards : 400