Planet Technology IP DSLAM IDL-4801 - Manual (Page 142)

IDL series User Guide 142
5.4.4 LACP AGGRPort Info Commands
5.4.4.1 Get aggrport info
Description:
Use this command to get a LACP aggregator port information.
Command Syntax:
get lacp aggrport info [ifname ]
5.4.4.2 Modify lacp aggrport info
Description:
Use this command to modify LACP aggregator port information.
Command Syntax:
modify lacp aggrport info ifname [actoradminkey
] [partadminkey ] [actorportprio
] [partadminportprio ] [actorsysprio
] [partadminsysprio ] [partadminsysid
] [partadminport ] [actoradminstate
activity | timeout | aggr] [partadminstate activity | timeout | aggr] [aggrstatus
enable|disable] [pktpriority ]
Parameters:
Name Description
Ifname The IfName of the Ethernet interface for the
aggregator.
Type : Modify － Mandatory
Get － Optional
Valid values : eth-*, eoa-*
actoradminkey The current administrative value of the Key for the
Aggregator.
Type : Optional
Valid values: 1 - 2^16 – 1
partadminkey The current administrative value of the Key for the
Aggregator's current protocol Partner.
Type : Optional
Valid values: 1 - 2^16 – 1
actorportprio The priority value assigned to this Aggregation