Planet Technology IP DSLAM IDL-4801 - Manual (Page 287)

IP DSLAM 287
aturtargetsnrmargin
<aturtargetsnrmargin-val>
Noise Margin the modem must achieve with a BER of 10 to the power
7 or better to successfully complete initialization
Type: Modify -- Optional
Valid values: 0 - 0xffffffff
aturdnshiftsnrmargin
<aturdnshiftsnrmargin-val>
Configured Signal/ Noise Margin for rate downshift. If the noise margin
falls below this level, the modem should attempt to decrease its
transmit rate. In the case that RADSL mode is not present, the value
will be 0.
Type: Modify -- Optional
Valid values: 0 - 0xffffffff
aturupshiftsnrmargin
<aturupshiftsnrmargin-val>
Configured Signal/ Noise Margin for rate upshift. If the noise margin
rises above this level, the modem should attempt to increase itís
transmit rate. In the case that RADSL is not present, the value will be 0.
Type: Modify -- Optional
Valid values: 0 - 0xffffffff
aturminupshifttime
<aturminupshifttime-val>
Minimum time that the current margin is above UpshiftSnrMgn, before
an upshift occurs. In the case that RADSL is not present, the value will
be 0.
Type: Modify -- Optional
Valid values: 0 - 0xffffffff
aturmindnshifttime
<aturmindnshifttime-val>
Minimum time that the current margin is below DownshiftSnrMgn,
before a downshift occurs. In the case that RADSL mode is not present,
the value will be 0.
Type: Modify -- Optional
Valid values: 0 - 0xffffffff
aturfastmintxrate
<aturfastmintxrate-val>
Configured Minimum Transmit rate for 'Fast' channels, in bps. Also
refer to 'adslAturConfRateChanRatio' for information regarding RADSL
mode and ATU-C transmit rate for ATU-R receive rates.
Type: Modify -- Optional
Valid values: 0 - 0xffffffff
aturintlmintxrate
<aturintlmintxrate-val>
Configured Minimum Transmit rate for 'Interleave' channels, in bps.
Also refer to 'adslAturConfRateChanRatio' for information regarding
RADSL mode and to ATU-C transmit rate for ATUR receive rates.
Type: Modify -- Optional
Valid values: 0 - 0xffffffff
aturfastmaxtxrate
<aturfastmaxtxrate-val>
Configured Maximum Transmit rate for 'Fast' channels, in bps. Also
refer to 'adslAturConfRateChanRatio' for information regarding RADSL
mode and to ATU-C transmit rate for ATUR receive rates.
Type: Modify -- Optional
Valid values: 0 - 0xffffffff