Planet Technology IP DSLAM IDL-4801 User Manual
Page 473

IP DSLAM
473
Type: Create - Mandatory
Delete - Mandatory
Modify - Mandatory
Get - Optional
Valid values: 0.0.0.0 - 223.255.255.0
mask
Indicates the mask to be logical-ANDed with the destination
address before being compared to the value in the ipRouteDest
field. Only absolute routes can be added in the downstream
direction for the IPOE interfaces (gsvIpRouteIfIndex as ipoe-*).
The mask for all such routes has to be 255.255.255.255. The
creation of default route in upstream (gsvIpRouteIfIndex as
GS_CFG_ANY_WAN) can have the mask as 0.0.0.0 only.
Type: Create - Mandatory
Delete - Mandatory
Modify - Mandatory
Get - Optional
Valid values: 0.0.0.0 - 255.255.255.0
gwyip
The IP address of the next hop of this route. Only absolute
routes can be added in the downstream direction for the IPOE
interfaces (gsvIpRouteIfIndex as ipoe-*). The next hop in such
cases has to be same as the destination IP address
(gsvIpRouteDest) specified.
Type: Create - Mandatory
Valid values: 0.0.0.0 - 223.255.255.0
ifname
anywan
The index value which uniquely identifies the local interface
through which the next hop of this route should be reached. If
IpRouteRid is not 0, than u32IpRouteIfIndex shall be
mandatory to be specified in the "create ip route" command.
The ifname value can be either ANYWAN (0xffffffff) or ifindex of
any of the ipoe interface (ipoe-*).
Type: Create - Optional
Modify - Optional
proxyarpstatus enable
|disable
This specifies if the Proxy ARP has to be done for this iproute
table entry.If IpRouteRid value is 0, then ProxyArpStatus will
not be specified while creating/modifying an entry in IpRoute
Table.
Type: Create - Optional
Modify - Optional
Default value: disable