Planet Technology IP DSLAM IDL-4801 - Manual (Page 340)

IDL series User Guide 340
valtype U8 | U16 | U32 This field specifies the value type of list. Value type
should match value type of matchingenlist nodes in case
a tree attached on same interface as the list. It should be
'U32' in case a rule containing IP subrule or Generic
subrule with cmptype as InGenList or NotInGenList is
attached on same interface. Currently only 'U32' value is
supported.
Type: Create -- Optional
Modify -- Optional
Default value: U32
Example:
$ create clfr namedlist info listid 2 valtype u32
Output:
Verbose Mode On
Entry Created
ListId : 2
Value Type : u32
Verbose Mode Off:
Entry Created
Output field:
Field Description
ListId This field stores the list identifier value.
Value Type This field specifies the value type of list. Value
type should match value type of matchingenlist
nodes in case a tree attached on same interface
as the list. It should be 'U32' in case a rule
containing IP subrule or Generic subrule with
cmptype as InGenList or NotInGenList is
attached on same interface. Currently only 'U32'
value is supported.