Planet Technology IP DSLAM IDL-4801 - Manual (Page 674)

IDL series User Guide 674
5.28.1.2 Download
Description:
Use this command to download a binary, configuration or user specific file from the
remote host.
Command Syntax:
download src dest ip [mode
tftp|ftp] [savemode comapact]
Parameters:
Name Description
src
This specifies the name of the binary, configuration or user specific file to be
downloaded from a remote host.
The filename contains the complete path on the host. The filename extension
can be .cfg or .bin or any other user specified extension. A cfg file can contain
only valid CLI commands. A .bin file must bea valid image file.
Type: Mandatory
Valid values: String of up to 128 characters (all characters except ‘;’, ‘‘, ‘?’)
dest
This specifies the name of the binary, configuration or user specific file on the
system. The user shall specify the filename for files present in the system, as
directories.
The directories are /nvram/bin/control/ - This directory contains control plane
zipped image. There can be multiple versions of images. The name of the
image file shall be as specified in the configuration file of createfi tool.
The files are stored in NVRAM.
/nvram/bin/dataplane/ - This directory contains data plane zipped image.
There can be multiple versions of images. The name of the image file shall be
as specified in the configuration file of createfi tool. The files are stored in
NVRAM.
/nvram/bin/decompressor/ - This directory contains decompressor image.
There can be multiple versions of images. The name of the image file shall be
as specified in the configuration file of createfi tool. The files are stored in
NVRAM.
/nvram/bin/dslphy/ - This directory contains DSL physical layer image. Only
one version of image is possible. The name of the image file shall be as
specified in the configuration file of createfi tool. The files are stored in
NVRAM.
/nvram/cfg/factorydef/ - This directory contains factory default configuration
files. There can be multiple versions of files. The name of the file shall be as
specified in the configuration file of createfi tool. The files are stored in