Planet Technology IP DSLAM IDL-4801 - Manual (Page 238)

IDL series User Guide 238
5.9.4 ADSL ATUC Chanperf Commands
5.9.4.1 Get adsl atuc chanperf
Description:
Use this command to get.
Command Syntax:
get adsl atuc chanperf [ifname ]
Parameters:
Name Description
ifname The ADSL ATUC channel interface name, for which
performance is to be viewed.
Type : Get － Optional
Valid values : dsli-0 - *, dslf-0 - *
Example:
$ get adsl atuc chanperf ifname dsli-0
Output:
Ifname : dsli-0
Perf Valid Intervals : 20
Perf Invalid Intervals : 30
Perf Valid 1Day Intvl : 20
Perf Invalid 1Day Intvl : 20
PerfData Curr15Min Curr1Day Prev1Day
Time Elapsed
/Monitored(sec) 15 10 20 45
Rx Blocks 10 45 30 89
Tx Blocks 20 65 70 48
Corrected Blocks 25 35 35 25
Uncorrected Blocks 30 95 80 30
NCD Count 90 86 35 20
OCD Count 60 42 15 20
HEC Count 45 21 75 35
NCD Failure Count 20 20 20 20
LCD Failure Count 20 20 20 20