Planet Technology IP DSLAM IDL-4801 - Manual (Page 310)

IDL series User Guide 310
|q9923IsdnOverlapped
|q9925IsdnNonOverlapped
|q9925IsdnOverlapped
|q9923AnnexMPotsExtUsNonOverlapped
|q9923AnnexMPotsExtUsOverlapped
|q9925AnnexMPotsExtUsNonOverlapped
|q9925AnnexMPotsExtUsOverlapped
shdsltxmode Region1 |Region2 Annexure Type specifies the regional settings for the
SHDSL line. Only valid for SHDSL.
Type: Create － Optional
Default value: Region1 |Region2
Example:
$ create dsl system dsltype Adsl linecoding Dmt adsltxcfg ansit1413 shdsltxmode
region1 Region2
Output:
Verbose Mode On
Entry Created
DSL Type : Adsl
Line coding : Dmt
Adsl Tx Config : ansit1413
Shdsl Tx Mode : region1 Region2
Verbose Mode Off:
Entry Created
Output Fields:
FIELD Description
DSL Type Identifies the firmware to be downloaded.
Line coding ADSL line code type.
Adsl Tx Config Transmission capabilities with which the DSL
system is configured. Its default value depends on
the Annex Type supported. Not valid for SHDSL.
Shdsl Tx Mode Annexure Type specifies the regional settings for
the SHDSL line. Only valid for SHDSL.