Planet Technology IP DSLAM IDL-4801 - Manual (Page 155)

IP DSLAM 155
CRC Errors count This specifies the number of CRC errors encountered.
Oversized SDU This specifies the number of oversized SDUs received.
References:
z
atm vc related commands
z
atm port and statistics related commands
z
atm vc statistics commands.
5.5.2 ATM OAM CC Commands
5.5.2.1 Get oam cc vc
Description:
Use this command to get.
Command Syntax:
get oam cc vc [ifname ]
5.5.2.2 Modify oam cc vc
Description:
Use this command to modify.
Command Syntax:
modify oam cc vc ifname [action act | deact] [dir sink | src |
both] [mode auto | manual]
Parameters:
Name Description
ifname This parameter specifies the interface, for which information is desired.
In case the field is not specified, then the information for all valid
interfaces should be displayed.
Type: Modify -- Mandatory
Get -- Optional
action act | deact This field specifies the CC action to be taken. This is used along with
CC direction field.
Type: Modify -- Optional
dir sink | src | both This field specifies the direction for CC
activation/Deactivation.Direction could be source (src), sink or both.