IPitomy IP1100+ PBX Administrator Guide - Manual (Page 96)

IPitomy IP PBX Admin Guide
2011 Copyright  IPitomy Communication, LLC 78 v4.0.1
www.ipitomy.com
Send Wakeup ping
before Survey Ping
if… Some devices are slow to respond to the first ping they receive but
have faster response times afterwards.
Port 80 Ping Wait
Maximum seconds to wait for basic phone web interface to signal that
it is alive. Rarely used.
Command Wait
Maximum seconds to wait for most commands.
User and Password
Phone’s Web User Name & Password may have to be specified if the
phone is not using factory default settings for these items. When these
fields are blank Auto-Discovery uses default settings.
Factory Default Wait
Maximum seconds to wait for the phone to signal completion of a
Factory Default.
Reset
The ‘Reset’ button will return all Scan Settings to original default
values.
Table 28 – Auto-Discovery Advanced Scan Settings and Descriptions
Commands Tab
The IP PBX system offers many ways to configure devices. This section describes an optional method using the
use Auto-Discovery feature.
Figure 46 – Auto-Discovery Command Functions Page
Sections/ Fields Description Commands
Phone?
Factory Default
Sends a Factory Default and restarts the phone.
YES
Restart
Sends a Restart instruction to the phone.
YES
Configure & Restart
Instructs phone to set TFTP server to the Server IP specified
under Advanced Settings. Then the phone is commanded to
restart, which will result in pulling down configuration files and
firmware files if there are updated ones present. YES
Assign, Configure &
Restart
Combines the functions of the Assign button with the Configure &
Restart button.
YES
Table 29 – Auto-Discovery Command Settings and Descriptions