IPitomy IP1100+ PBX Administrator Guide User Manual
Page 181

IPitomy IP PBX Admin Guide
2011 Copyright IPitomy Communication, LLC
163
v4.0.1
www.ipitomy.com
FTP Directory
This is the FTP directory on the server where a backup will be stored.
User
Enter the Username required to write files to your FTP
Password
Enter the password associated with the Username used to access your FTP
SAVE Button
This button will save the changes made to the automated backup settings.
Test Settings
Button
This button will initiate a test to validate the FTP server, directory, username,
and password. A message will display the success or failure, and if
successful, a test file will be placed on the FTP
Table 61 – PBX Database Automatic Backup Settings and Descriptions
Set Automatic Backup
STEPS:
1
From the PBX Setup
Database Administration page, locate the Automatic Backup
section.
2
Enabled the Automated Backup process by setting the Enabled field to “YES”.
3
Select the Category that you want to have backed up.
4
Set the Schedule to the desired interval.
5
Enter FTP parameters and Username and Password if you want the backup to be sent
to an external FTP.
6
Click the Save button to save the settings.
7
Click on the Apply Changes link at the top of the page to save the information and
commit the changes to the database.
8
Click the Test Settings button to validate the automated backup settings. You should
receive a backup “Successful” message. If the setup test failed, you receive an “Error”
with a message indicating what parameters failed.
9
Make the necessary adjustments to the backup parameter, Save, Apply Changes, and try
the test again.
Upload Backup File Section
This feature allows you to upload backup files to the PBX system.
Figure 90 – PBX Database Upload Backup File Section