IPitomy IP1100+ PBX Administrator Guide - Manual (Page 166)

IPitomy IP PBX Admin Guide
2011 Copyright  IPitomy Communication, LLC 148 v4.0.1
www.ipitomy.com
Clicking this button in the gray bar will delete the COS. Clicking this button next to
a route will delete that route from the viewed COS.
Outgoing Call Routing
This section demonstrates, by example, some of the common configurations used with Outbound Routing.
Configure Block Calls Subroutes
In this example, your customers want to block their users from dialing 1-900 numbers. To achieve this, you will
need to create a subroute and configure it using the specifications below.
Figure 78 – Blocking Dialing 1-900
Sections/Fields Description
Route Name
Enter a meaningful name for the outbound route. In this case you may
want to call it “Block 900”.
Route Type
Select 1+ Dialing, as this will be a subroute
Number
900, since the default 1+ Dialing route skips the 1 that is dialed, and
reads the next 3 digits for subroutes