IPitomy IP1100+ PBX Administrator Guide - Manual (Page 111)

IPitomy IP PBX Admin Guide
2011 Copyright  IPitomy Communication, LLC 93 v4.0.1
www.ipitomy.com
5 Select the desired Ring Strategy from the drop-down list.
6 Select the desired Failover Destination from the list of available options.
7 Enter the time for the Timeout parameter.
8 Select “Yes” if you want to enable the Allow Recording setting. Otherwise, set it to “No”.
9 Enter the time for the Agent Ring Time parameter.
10 Select “Yes” if you want to enable the Autofill setting. Otherwise, set it to “No”
11 Select “Yes” if you want to enable the Ring in use setting. Otherwise, set it to “No”
12 Click the button .
13 From the Members section of the Edit Ring Group page, select the extension number
from the list of extensions that you want to add to the ring group. Click the ADD button.
14 A second list appears next to the Members list displaying the selected extension. Repeat
step 13 until all extensions that you want to add are on the list. Additionally, Shift or
Control click functionality works for adding multiple extensions at once.
15 To remove an item from the list of additions, select the extension number then click the
REMOVE button.
16 Define Priorities for the extensions, if needed. The scale ranges 0 thru 9 (0 is the highest
priority).
17 Click button to save the changes.
18 Click the Apply Changes link located at the top right hand corner of the page, to commit
the changes to the database.