IPitomy IP1100+ PBX Administrator Guide User Manual
Page 51
IPitomy IP PBX Admin Guide
2011 Copyright IPitomy Communication, LLC
33
v4.0.1
www.ipitomy.com
The following table describes the fields and functions available on the Hardware Trunks Provider Configuration
page.
Section
Description
Configuration Section
Slot
Defines which physical PCI slot the card is connected to.
Channels
This indicates whether the card has channels configured. Using the mouse
to hover over this field will provide you with the number of channels at are
set for this card.
Model
This is the model or type of card.
This button changes the card set in the database for the adjacent slot. The
change is immediate and will delete trunks associated with another card in
the same slot.
Selecting this button will take you to the Channel Group Parameters Card
Configuration page, where you can create a channel group.
Channel Groups Section
Name
The name associated with this channel group.
Channels
The number of channels that have been assigned.
Card
The card number associated with the channel group.
Action
- Clicking on the pencil icon allows you edit the settings for the selected
channel group.
- Clicking on the “X” icon allows you to delete/remove the selected
channel group.
NOTE: You must delete channels from outbound routes in order to
delete them.
T-1 Span Configuration
Span
Should automatically set to the appropriate span in regards to the cards that
are installed in the PBX.
Timing
Set per your providers instructions, “0” (zero) would be the PBX provides
timing, “1” would be the timing is provided by the Provider.
LBO
Line Build Out, set per your providers instructions.
Framing
Set per your provider’s instructions.
Coding
Set per your provider’s instructions.
PRI
Check if the trunk is a PRI, leave blank if the trunk is a standard T-1.
T-1 PRI Configuration
Span
Should automatically set to the appropriate span in regards to the cards that
are installed in the PBX.
Switch Type
Defines what type of equipment the PBX is communicating with. Set per
your provider’s instructions.
Reset Interval
Set per your provider’s instructions.
Dialplan
Set per your provider’s instructions.