IPitomy IP1100+ PBX Administrator Guide - Manual (Page 31)

IPitomy IP PBX Admin Guide
2011 Copyright  IPitomy Communication, LLC 13 v4.0.1
www.ipitomy.com
Figure 9 – Create Extension Results Page
6 The Create Extensions page will display the results of your import for each extension. You
should see a “SUCCESS” message.
7 Click on the Return to Extensions link that appears on the page. This brings you back to
the Create Extensions page. Review the Extensions List and find the extension (s) you just
created.
8 Click on the Apply Changes link at the top of the page to make these changes live on the
PBX. A message “Settings Applied” will appear.
9 You are now ready to update the various settings for the new extension. (See the
Destination Extensions section of this user guide for more details on Extensions).
Network Requirements
Making preparations for the network in advance will assure there are no surprises. If you are going to have remote
extensions, you will need access to the router to setup a network address translation (NAT) and port forwarding.
A LAN with a broadband connection is required for operation of the system. It must be on a fast Ethernet (100baseT
or better). The system must also use Ethernet data switches. The router can use DHCP or not, depending on
preference. The IPitomy IP PBX requires a fixed IP on the router subnet. Several ports may need to be forwarded.
Make sure your router has TCP/IP port range forwarding by checking the box or product guide. The router should
have a fixed IP address with a public IP.
Pre-existing TFTP servers or DHCP servers broadcasting TFTP servers may cause conflicts for phone configuration.
If you have a pre-existing TFTP server being broadcast by your DHCP server, please contact IPitomy support to
determine the best solution.