IPitomy IP1100+ PBX Administrator Guide User Manual
Page 42

IPitomy IP PBX Admin Guide
2011 Copyright IPitomy Communication, LLC
24
v4.0.1
www.ipitomy.com
The parameter for the IP PBX Web Server is pre-configured per the manufacturer’s specifications.
We recommend that you do not change this configuration.
Figure 18 – Web Server Configuration Page
Feature
Description
Restart Web
Server
This feature allows you to restart the web server so that changes made that
impact server components can be applied.
Note: Restarting the server will not interrupt phone service. A reboot
of the PBX system will also apply changes made to other attributes.
Allow Access
From
Defines the networks and/or domains that are allowed to access the PBX.
The “Allow” format may be:
•
Domain name
•
Full IP address
•
Partial IP address
•
Network / netmask pair
•
Network / CIDR specification
Delete Selected
Items
This button allows you to delete multiple services at a time.
Load Factory
Defaults
This button will set the PBX back to the default Web Server settings.
Add a New Item
This section is where you would add new rules for accessing the Web
Server