IPitomy IP400 Quick Start Guide - Manual

Page 1 of 6
Copyright 2009 © IPitomy Communications, LLC
[email protected] | 941.306.2200
________________________________________________________________
IP400 Quick Guide
The IP400 is a four port FXO gateway designed to integrate traditional telephone lines with your
IP PBX. The following guide is intended to help you configure the IP400 and the PBX together in
as few steps as possible.
Accessing the IP400
1. Connect the IP400 to your network via the LAN port
2. Log into the PBX
3. Navigate to Destinations=>Extensions
4. Click Auto Discovery
5. Search the page for the IP400 MAC and note the IP address of the IP400
Configuring the IP400
SIP
Service
1. In your web browser, enter the IP address for the IP400
2. Login to the IP400
Username: Admin
Password:
3. Navigate to Setup=>SIP Service
4. Enter the IP address for the PBX under SIP proxy address
5. For SIP proxy port enter 5060
6. Leave the rest of the settings at their defaults. Minor changes may need to be made in
the future once everything is tested (eg. Sometimes the DTMF method needs to be set to
SIP Info)
7. Click Save