IPitomy IP1100+ PBX Administrator Guide User Manual
Page 20

IPitomy IP PBX Admin Guide
2011 Copyright IPitomy Communication, LLC
2
v4.0.1
www.ipitomy.com
•
Enhanced Voice Messaging System with Unified Messaging
•
Meet-me Conference Application
•
Built-in Music on Hold
•
Call Queuing for Inbound Calls
•
Find Me/Follow Me
•
Remote Extensions
•
Browser-based Administration
•
Branch Offices
•
Automatic Call Distribution (ACD)
Figure 1 – IPitomy IP PBX System
The IPitomy IP PBX’s administration menus are a series of Web pages accessible from a Web browser. To the
left of the Menu is a navigation bar that allows users to click on and administer each section of the system.
Administration of the IPitomy IP PBX is simple and intuitive. The system is designed with six primary areas of
functionality:
•
System − System setup consists of network configuration settings.
•
Providers − Providers are sources of PSTN and VoIP connectivity. Providers are the lines that
handle all incoming and outgoing calls. All VoIP and traditional telephone providers are setup
here. DID numbers are also entered here.
•
Destinations − Destinations are places where calls are routed in the system: extensions, groups
of extensions, automated attendants, conferences, and voicemail.
•
Call Routing − These settings route inbound calls to specific destinations within the system, and
send outbound calls over specific local, long distance, international, and emergency routes.
•
PBX Setup − These settings globally configure PBX timers, voice messaging, and other system
features.
•
Reporting − These reports display system usage, monitor activity, and provide diagnostic
information.