IPitomy IP1100+ PBX Administrator Guide User Manual
Page 226

IPitomy IP PBX Admin Guide
2011 Copyright IPitomy Communication, LLC
208
v4.0.1
www.ipitomy.com
View CDR Report – Smart Personal Console
IPitomy PBX Software version 3.4.1 and above have the added ability to view CDR Reports and Queue data from
Smart Personal Console (SPC) using a special user name and password.
STEPS to access CDR and Queue Graphs via Smart Console Console:
1
Within PBX Administration, navigate to the PBX Setup
General page
2
Locate to the General Settings section (second section from the top).
3
Locate the SPC Reports User Password field (bottom of section)
4
It may be helpful to change this to a user-friendly password. If you change the password
be sure to
and
.
5
Make a note of this password.
6
On the PC that will be used to access CDR Reports and Queue Graphs via SPC, open a
web browser and navigate to the IPitomy PBX login screen
7
Using the right side – Smart Personal Console (User Login) input the word “reports” as
the user name and the password that you noted previously.
8
Click on
.
9
The CDR-Report page is opened, use the instructions below to extract the data you wish.
Or,
10 Click on
to open that interface and use the instructions below to extract
that data.