IPitomy IP1100+ PBX Administrator Guide - Manual (Page 52)

IPitomy IP PBX Admin Guide
2011 Copyright  IPitomy Communication, LLC 34 v4.0.1
www.ipitomy.com
Indication Set per your provider’s instructions.
D Channel Set to 24.
USB Device Browser
Slot Should automatically set to the appropriate slot that corresponds to the USB
slot the device is connected to.
Hardware Functions
Restart USB
Devices & PBX
Services This button will restart USB devices and PBX Services.
Table 12 – Hardware Trunk Provider Settings and Descriptions
The following section outlines how to setup the parameters for hardware trunks.
Configuring Hardware Trunks
STEPS:
1 Navigate to Providers Hardware Trunks. The Hardware Trunk (Providers) page
appears. The hardware trunks and their values that have already been provisioned will be
displayed.
2 The system will allow configuring of up to 2 cards that interface with analog or T-1
devices. Select the card models installed in your IP PBX individually and click Set button
for each card in order to tell the system which cards you have.
3 Once you have set the card, click the Add Lines button to the right of the corresponding
card to define line/channel/trunk groups associated with that card. The Edit Hardware
Provider page appears.