IPitomy IP1100+ PBX Administrator Guide - Manual (Page 150)

IPitomy IP PBX Admin Guide
2011 Copyright  IPitomy Communication, LLC 132 v4.0.1
www.ipitomy.com
Figure 70 – Branch Offices Page
Configuring Office 1
STEPS:
1 Click on Destinations Branch Offices. The Branch Offices page is displayed.
2 Click on the ADD office button. The Edit Branch Office page appears.
3 Give a unique NAME for the connection. The name should only contain alpha-numeric
characters and no spaces. It should be ONE WORD ONLY.
4 Enter the External IP of the PBX in the Host field.
5 Enter a unique DIALING PREFIX of an asterisk followed by two numbers.
6 Give a unique PASSWORD for the connection.
7 Select NO for REGISTER (Note: that registration is not required if host is known).
8 Configure Enable Trunking as needed.
9 Configure Enable Multisite Manager Connection as needed.
10 Set QUALIFY at 0.
11 Configure Enable IAX2 Trunking as needed.