IPitomy IP1100+ PBX Administrator Guide User Manual
Page 175
IPitomy IP PBX Admin Guide
2011 Copyright IPitomy Communication, LLC
157
v4.0.1
www.ipitomy.com
!
IMPORTANT:
Please contact IPitomy’s Technical Support Group
if you need further assistance by email at
or
phone 941-306-2200 option 2. You can also search the FAQ page on
our website at
www.ipitomy.com
.
Disable Log Set Security Setting
STEPS:
1
From the PBX Setup
General System Setup page, locate the Security Settings
panel.
2
Disable the security setting by selecting “No” from the drop-down list for the Log
Watch Ban Service.
3
Click the
button to save the changes.
4
Click the Apply Changes link located at the top right hand corner of the page, to
commit the changes to the database.
Time Settings Section
Figure 85 – PBX Time Settings Section
Sections/Fields
Description
Current System
Time
This is the current time of the PBX system.
Synchronize
Clicking this button will cause the PBX to sync to the time server. This will
result in a restart of services, interrupting calls. If the time is off by more
than an hour, we advise you to reboot the PBX after synchronization.
Timezone
This is the time zone for the PBX system.