Grass Valley Xmedia Server Vertigo Suite v.5.0 - Manual (Page 97)

7-12 XMS Configuration Guide
MOS Server configuration and monitoring
Adding a MOS Channel Association
A MOS channel map is created on the Xmedia Server Control Panel by adding a MOS
CHANNEL A SSOCIATION for each of the MOS channel names listed in the NCS’s rundown.
To map a MOS channel name to a publish location:
1.
Open the Newsroom Control System (NCS) client application (i.e. ENPS or iNews) and
open the rundown so that the MOS channel column is displayed. Take note of the MOS
channel names.
2. Open the X MEDIA S ERVER C ONTROL P ANEL and select MOS C HANNEL M APPINGS from
the MOS OPTION drop-down list.
3. Click A DD .
The A DD A MOS C HANNEL A SSOCIATION dialog box appears (figure 7-12 ).
Figure 7-12. The MOS Channel Association dialog box
4. Type the MOS channel name from the NCS in the MOS CHANNEL field.
5. Select either C HANNEL , D EVICE 2, or P UBLOC 2 from the A SSET TYPE drop-down list.
6. Select the asset’s name from the A SSET NAME drop-down list.
7. Click A DD .
The A DD A MOS C HANNEL A SSOCIATION dialog box closes and the MOS channel
name’s channel map is immediately displayed in the MOS C HANNEL M APPINGS list.
8. Optional: Click R EFRESH to refresh the MOS channel mappings list to verify if any other
additions, deletions, or modifications of channels, devices and publoc2 assets have
taken place.