Grass Valley Xmedia Server Vertigo Suite v.5.0 - Manual (Page 89)

7-4 XMS Configuration Guide
MOS Server configuration and monitoring
• D ELETE X PLAY PLAYLISTS ON MOS RO D ELETE COMMANDS
When enabled, the Xplay playlists that corresponds to the NCS’s rundown will be
automatically deleted when the rundown is deleted by the NCS client. When disabled,
the Xplay playlists will not be deleted when the NCS’s rundowns are deleted.
5. Identify the Newsroom Control System (NCS) that the Xmedia Server will communicate
with by selecting the N
EW button in the Newsroom Control System (NCS) section.
The N EWSROOM C ONTROL S YSTEM (NCS) dialog box appears.
6. Specify the NCS settings for the ENPS or iNews server on the Newsroom Control
System dialog box (figure
7-4 ).
a. In the NCS ID field, type the ID for the ENPS server or the iNews server. This value
must be all uppercase characters. The ENPS’s ID can be found at ENPS>S
YSTEM
M AINTENANCE >S ERVERS .
b. In the H OST field, type ENPS or iNews server’s host name or IP address. This
value must be all uppercase characters and is often the same as the NCS ID.
c. In the R UNDOWN CATEGORY field, type the name of the Rundown subcategory
where the rundowns will be stored by default. This value must be all uppercase
characters.
d. Specify the I NBOUND ENCODING and O UTBOUND ENCODING setting:
Select UCS2-BE (2-byte Universal Character Set - Big-Endian format) from the
drop-down lists for an ENPS server or iNews server configuration.
e. If using iNews, enable the S UPPORTS XML VERSION TAG option by selecting the
check box. Enabling the MOS version tag, means the MOS server will ensure each
MOS message sent to the NCS is headed with the tag. ENPS does
not expect it, but iNews does.
f. Enable or disable the N OTIFY NCS ON PAGE CREATION option.
Enabling N OTIFY NCS ON PAGE CREATION means that the MOS server will send
mosObj
messages to the NCS when graphics are created, modified or deleted in
our system. As a result, you are able to see shared pages in the lists displayed on
the NCS client user-interface.
g. Click OK to accept settings and close the N EWSROOM C ONTROL S YSTEM dialog box.
Figure 7-4. Newsroom Control System’s properties
7. Click A PPLY .