Grass Valley Xmedia Server Vertigo Suite v.5.0 - Manual (Page 83)

6-20 XMS Configuration Guide
Replication of the XMS Server’s database
6. Specify the appropriate value in the following server setting fields:
7. Click either OK or A PPLY on the S ETTINGS window.
8. Repeat steps 3 to 6 for each of the remaining Vertigo Suite applications.
XM EDIA S ERVER IP A DDRESS The IP address of the primary Xmedia Server, which should match
the value in the LAN IP A
DDRESS field on the primary server’s
Xmedia Server Control Panel.
XM EDIA S ERVER P ORT The communications port of the primary Xmedia Server, which
should match the value in the XMS
SERVER PORT field on the
primary server’s Xmedia Server Control Panel. This is typically,
14050.
B ACKUP X MEDIA S ERVER IP
A DDRESS
The IP address of the secondary Xmedia Server, which should
match the value in the LAN IP A
DDRESS field on the secondary
server’s Xmedia Server Control Panel.
B ACKUP XM EDIA S ERVER P ORT The communications port of the secondary Xmedia Server, which
should match the value in the XMS
SERVER PORT field on the
secondary server’s Xmedia Server Control Panel. This is typically,
14050.
D ATA S ERVER IP A DDRESS The IP address of the primary Xmedia Server that is running the
Data Server. Thus, this value should be identical to the value set
for the XM
EDIA S ERVER IP A DDRESS listed above.
D ATA S ERVER P ORT The communications port of the primary Xmedia Server that is
running the Data Server. Thus, this value should be identical to the
value set for the XM
EDIA S ERVER P ORT listed above.
B ACKUP D ATA S ERVER IP A DDRESS The IP address of the secondary Xmedia Server that is running the
Data Server. Thus, this value should be identical to the value set
for the B
ACKUP XM EDIA S ERVER IP A DDRESS listed above.
BA CKUP D ATA S ERVER P ORT The communications port of the secondary Xmedia Server that is
running the Data Server. Thus, this value should be identical to the
value set for the B
ACKUP XM EDIA S ERVER P ORT listed above.