Grass Valley Xmedia Server Vertigo Suite v.5.0 - Manual (Page 28)

XMS Configuration Guide 2-1
2 XMS
HARDWARE OVERVIEW
Physically, the Xmedia Server is a 2RU rackmount server that incorporates redundant fans,
power, and ethernet ports, with 2 TB of RAID-1 storage. The Xmedia Server features easy
frontal access to the storage drives, and a control panel featuring LEDs and buttons for
system monitoring and operation. The rear panel also provides convenient access to two
power supply modules, seven PCI expansion slots (video, audio, and graphics cards), and
various I/O ports (USB, COM1, VGA, Ethernet...etc).
The following sections provide additional details regarding the Xmedia Server’s hardware:
•
“Front panel components, LEDs and buttons” on page 2-2
• “Back panel components and connectors” on page 2-4
• “Mounting the Xmedia Server chassis in a rack” on page 2-5
CAUTION
Xmedia Server devices should only be installed by trained personnel in a restricted access
locations only. All health and safety regulations and precautions must be observed.
WARNING
To reduce the risk of electric shock, disconnect all power sources before servicing
Xmedia Server devices.
Chassis F ORM : 2U rackmount chassis
H EIGHT : 3.5” (89mm)
W IDTH : 17.2” (437mm)
D EPTH : 25.5” (648mm)
Power consumption 700W (1 + 1) Redundant AC-DC power supply.
Maximum draw is a total of 700W.
Note that the device’s electrical ratings are located on the
plug-in power supply modules.
Temperature Ambient temperature: 35 C
Note: This shall be the maximum internal temperature within
the rack in which the Xmedia Server unit is installed.
°