Grass Valley Xmedia Server Vertigo Suite v.5.0 - Manual (Page 87)

7-2 XMS Configuration Guide
MOS Server configuration and monitoring
Configuring the Xmedia Server’s MOS settings
Selecting the MOS tab on the Xmedia Server Control Panel displays the MOS component
settings for the Xmedia Server. The MOS page has three (3) views, which are controlled
using the MOS O
PTION drop-down list at the top of the MOS page. Figure 7-2 shows that
selecting the C ONFIGURATION option from the MOS OPTION drop-down list displays the
G ENERAL and N EWSROOM C ONTROL S YSTEM (NCS) settings, which are used to:
• Enable the Xmedia Server’s MOS component and specify details about the Xmedia
Server that allows it to become a MOS Server
• Identify the Newsroom Control System and configure its protocol options in preparation
for communication with the MOS Server (i.e. Xmedia Server)
Figure 7-2. The Xmedia Server Control Panel’s MOS configuration settings
The following sections provide instructions for enabling, configuring, and editing the settings
that are responsible for establishing communication between the MOS server and the
Newsroom Control System:
•
“Instructions for configuring the Xmedia Server as a MOS server” on page 7-3
• “Editing the Newsroom Control System’s properties” on page 7-6
• “Deleting the Newsroom Control System” on page 7-7