Grass Valley K2 Dyno v.1.6 User Manual
Page 98
98
K2 Dyno Controller User Manual
15 April 2010
Chapter 5 Marking Function
3. Touch the panel you want to edit from the In, Out, or Dur panel, enter the timecode,
and then touch
ENTER
.
Either operate the JOG knob or play a scene, and press the
In
/
Out
button at the
desired scene while watching the monitor.
• Setting the In/Out point changes the duration automatically.
• Editing the duration automatically changes the timecode of the Out point.
• Pressing the
In
/
Out
button sets the playback timecode, at the point when the
button is pressed, as the In/Out point.
• When you set the
In
/
Out
point (when you press the
In
/
Out
button), the
respective button lights up in green.
• If you press the
Take
button, the trim mode is finished to return to the previous
screen.
Button operation